Hydraulic Oil Cylinder TRH1.50MF1LT14X12.00
13~15mm Stroke 1.50mm Bore Size
Product Description:
Parker Series 2H Heavy Duty Hydraulic Cylinder sets the standard
for quality performance, durability, and a trouble-free operation.
Through Parker's superior design, high-quality materials, and
stringent manufacturing practices, customers receive long-lasting
service life and reduced operating costs in their cylinder.
To provide customers with increased machine productivity, the
design of Series 2H cylinders includes special features such as a
"Jewel" rod gland, hard chrome plated pedal rods, and stepped
cushions. Such features help to reduce downtime, shortening cycle
times and improving system efficiency.
Each and every Parker cylinder is exhaustively tested prior to
being shipped out of our factory, ensuring its proper performance
and leak-free operation. If you require a hydraulic cylinder for
your industrial application, then Parker Series 2H is your best
bet. It is the best value for performance.
Features:
Primary Seal
TS-2000 Rod Seal is designed to be completely leakproof. Its unique
self-compensating and self-relieving feature is able to withstand
any possible variations and effectively cope with any potential
mechanical deflection.
Jewel Rod Gland Assembly
This assembly is unique in that it can be replaced without needing
to disassemble the cylinder. It sports a long bearing surface which
is inboard of the seals, guaranteeing that it gets the necessary
lubrication from within the cylinder. A sturdy O-ring is used to
complete the seal and assure its tight connection between the gland
and head, acting like a prevailing torque-type lock.
Secondary Seal
The Double-Service Wiperseal™ was specially designed to both wipe
away any oil film adhering to the rod during the extend stroke and
clean it on the return stroke.
Piston Rod Stud
This part is available on 2.000" diameter rods and smaller, and can
only be used alongside standard style #4 rod end threads. The
threads of the studs have been carefully rolled and they have all
been made from high strength steel. The connection between the stud
and piston rod is solidified with anaerobic adhesive.
Piston Rod
These rods are made of medium carbon steel. The inductions
casehardening, hard chrome-plating and polishing to 10 RMS finish
make them incredibly strong. Depending on the size, the material
always has a minimum yield between 85,000 and 100,000 psi between
0.625" to 4.000". While larger diameters may vary between 57,000 to
90,000 psi depending on their rod diameter.
Ports
Standard ports are SAE “O” ring ports, although NPTF ports are
available as an optional at no extra charge. Oversize NPTF and SAE
ports can be supplied for an extra fee.
Adjustable Floating Stepped Cushions
For maximum performance, these cushions provide superior
performance in shock reduction. They can be supplied at either the
head end, cap end or both without impacting the overall envelope or
mounting dimensions. They are optional and an economical choice for
even the most demanding applications.
One-Piece Nodular Iron Piston
The wide piston surface which contacts the cylinder bore reduces
the bearing loads, and an anaerobic adhesive is used to provide a
lasting secure connection between the piston and rod.
Applications:
Parker's TRH1.50MF1LT14X6.00 Hydraulic Oil Cylinder is a important
component for industrial equipment. It is made with high quality
materials and certified by CE. It has a nominal pressure of 3000
psi and is capable of withstanding tension loads of J, JB, and JJ.
It is designed to work with hydraulic oil and comes with a standard
square head. The minimum order quantity is 1 and the price is
negotiable. It will be packaged in cartons and can be delivered
within 1-7 work days after payment. Payment terms include T/T,
Western Union, and Paypal. The supply ability is 5000PCs per month.
Extended Tie Rod Mountings – TB, TC, and TD
Application:
• Straight line force transfer
• Compression loads (push) – use TC or TD
• Tension loads (pull) – use TB or TD
Advantages:
• Ease of mounting in tight spaces
• Force is transferred along the centerline of the cylinder
Flange Mountings – J, JB, JJ, H, HB, and HH
Application:
• Straight line force transfer
• Compression loads (push) – use H, HB or HH
• Tension loads (pull) – use J, JB, or JJ
Advantages:
• Rigid base mounting due to large flange area
• Force is transferred along the centerline of the cylinder
Side Tap Mounting – F / Side Lug Mounting – C
Application:
• Straight line force transfer
• Can be used in compression or tension loads
• Thrust key and secure mounting area are vital
Advantages:
• Ease of mounting
Pivot Mountings – BB and SB
Application:
• Curved or arc line force transfer
• Can be used in compression or tension loads
• Movement in a simple arc – use BB mountings
• Movement in a compound arc – use SB mountings
Advantages:
• Ease of mounting
• Design flexibility
• Self aligning (SB)
Trunnion Mountings – D, DB, DD and DE
Application:
• Curved or arc line force transfer
• Can be used in compression or tension loads
• Compression loads – use DB or DD, DE mountings
• Tension loads – use D, DD or DE mountings
Advantages:
• Ease of mounting
• Design flexibility
• Self aligning
Technical Parameters:
| Style J – Maximum Operating Pressure / 2HD |
Bore
Ø | Maximum psi Push3 |
| Rod Code |
| 1 | 2 | 3 | 4 |
| 1.50 | 1400 | 1000 | - | - |
| 2.00 | 2000 | 1200 | - | - |
| 2.50 | 700 | 1000 | 700 | - |
| 3.25 | 800 | 600 | 800 | - |
| 4.00 | 1000 | 700 | 1000 | - |
| 5.00 | 850 | 800 | 850 | 450 |
| 6.00 | 650 | 400 | 650 | 400 |
| Style J – Dimensional and Mounting Data |
Bore
Ø | Rod
No. | MM
Rod
Ø | W | WF | Y | Add Stroke |
| ZB Max. |
| 1.50 | 1 (std.) | 0.625 | 0.63 | 1.00 | 2.00 | 6.25 |
| 2 | 1.000 | 1.00 | 1.38 | 2.38 | 6.63 |
| 2.00 | 1 (std.) | 1.000 | 0.75 | 1.38 | 2.38 | 6.69 |
| 2 | 1.375 | 1.00 | 1.63 | 2.63 | 6.94 |
| 2.50 | 1 (std.) | 1.000 | 0.75 | 1.38 | 2.38 | 6.81 |
| 2 | 1.750 | 1.25 | 1.88 | 2.88 | 7.31 |
| 3 | 1.375 | 1.00 | 1.63 | 2.63 | 7.06 |
| 3.25 | 1 (std.) | 1.375 | 0.88 | 1.63 | 2.75 | 7.94 |
| 2 | 2.000 | 1.25 | 2.00 | 3.13 | 8.31 |
| 3 | 1.750 | 1.13 | 1.88 | 3.00 | 8.19 |
| 4.00 | 1 (std.) | 1.750 | 1.00 | 1.88 | 3.00 | 8.50 |
| 2 | 2.500 | 1.38 | 2.25 | 3.38 | 8.88 |
| 3 | 2.000 | 1.13 | 2.00 | 3.13 | 8.63 |
| 5.00 | 1 (std.) | 2.000 | 1.13 | 2.00 | 3.13 | 9.38 |
| 2 | 3.500 | 1.38 | 2.25 | 3.38 | 9.63 |
| 3 | 2.500 | 1.38 | 2.25 | 3.38 | 9.63 |
| 4 | 3.000 | 1.38 | 2.25 | 3.38 | 9.63 |
| 6.00 | 1 (std.) | 2.500 | 1.25 | 2.25 | 3.50 | 10.81 |
| 2 | 4.000 | 1.25 | 2.25 | 3.50 | 10.81 |
| 3 | 3.000 | 1.25 | 2.25 | 3.50 | 10.81 |
| 4 | 3.500 | 1.25 | 2.25 | 3.50 | 10.81 |
| Style J – Dimensional and Mounting Data |
Bore
Ø | E | EE | F | FB
Ø | G | J | K | R | TF | UF | Add Stroke |
| NPTF1 | SAE2 | LB | P |
| 1.50 | 2.50 | 1/2 | 10 | 0.38 | 0.44 | 1.75 | 1.50 | 0.38 | 1.63 | 3.44 | 4.25 | 5.00 | 2.88 |
| 2.00 | 3.00 | 1/2 | 10 | 0.63 | 0.56 | 1.75 | 1.50 | 0.44 | 2.05 | 4.13 | 5.13 | 5.25 | 2.88 |
| 2.50 | 3.50 | 1/2 | 10 | 0.63 | 0.56 | 1.75 | 1.50 | 0.44 | 2.55 | 4.63 | 5.63 | 5.38 | 3.00 |
| 3.25 | 4.50 | 3/4 | 12 | 0.75 | 0.69 | 2.00 | 1.75 | 0.56 | 3.25 | 5.88 | 7.13 | 6.25 | 3.50 |
| 4.00 | 5.00 | 3/4 | 12 | 0.88 | 0.69 | 2.00 | 1.75 | 0.56 | 3.82 | 6.38 | 7.63 | 6.63 | 3.75 |
| 5.00 | 6.50 | 3/4 | 12 | 0.88 | 0.94 | 2.00 | 1.75 | 0.81 | 4.95 | 8.19 | 9.75 | 7.13 | 4.25 |
| 6.00 | 7.50 | 1 | 16 | 1.00 | 1.06 | 2.25 | 2.25 | 0.88 | 5.73 | 9.44 | 11.25 | 8.38 | 4.88 |
Customization:
Customized Hydraulic Oil Cylinder with Parker Brand
The hydraulic oil cylinder is powered by hydraulic pressure, and
can be used in a variety of applications. Our custom-made hydraulic
oil cylinders come with the Parker brand. The key features are as
follows:
- Brand Name: Parker
- Model Number: TRH1.50MF1LT14X6.00
- Place of Origin: China
- Certification: CE
- Minimum Order Quantity: 1
- Price: Negotiation
- Packaging Details: Carton /As The Clients Require
- Delivery Time: 1-7Work Days After Payment
- Payment Terms: T/T, Western Union, Paypal
- Supply Ability: 5000PCs per month
- Standard Construction: Square Head
- Cushion Type: Adjustable
- Stroke: 13~15mm
- Rod Diameter: 0.625" Through 4.000"
- Cylinder Diameter: 36mm
We provide customized services for the hydraulic oil cylinder. The
product is of high quality and has passed the CE certification. We
have a large inventory and can provide a fast delivery. If you have
any needs, please contact us.
1. You have 7 days to contact us and 30 days to return it from the
date it was received. If this item is in your possession more than
7 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR
REPLACEMENT.
There are NO EXCEPTIONS!
2. All returned items MUST BE in the original packaging and you
MUST PROVIDE us with the shipping tracking number, specific reason
for the return.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the
item in its original condition and packaging with all components
and accessories included, AFTER BOTH Buyer and Seller cancel the
transaction from aliexpress. OR,you may choose to have a
replacement.
you may choose to have a replacement. EXCEPTIONS!
2. All returned items MUST BE in the original packaging and you
MUST PROVIDE us with the shipping tracking number, specific reason
for the return, and your po#.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the
item in its original condition and packaging with all components
and accessories included, AFTER BOTH Buyer and Seller cancel the
transaction from aliexpress. OR, you may choose to have a
replacement.
Support and Services:
Hydraulic Oil Cylinder Technical Support and Service
We provide technical support and service for Hydraulic Oil
Cylinders. Our team of certified professionals are trained in all
aspects of installation, operation, and maintenance of Hydraulic
Oil Cylinders. We can provide troubleshooting services, or answer
any questions you may have about the product.
We also offer 24/7 emergency repair services for Hydraulic Oil
Cylinders. Our team of technicians are available to provide on-site
repairs or answer any questions you may have about the product.
For any questions or concerns regarding your Hydraulic Oil
Cylinder, please don't hesitate to contact us.
Packing and Shipping:
1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address
MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your
reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes
weekends and holidays. Transit times may vary, particularly during
the holiday season.
6. If you have not received your shipment within the period, please
contact us. We will track the shipment and get back to you as soon
as possible with a reply. Our goal is customer satisfaction!
7. Due to stock status and time differences, we will choose to ship
your item from our first available warehouse for fast delivery.
8. We seller are not in charge of import duty, buyer is responsible
for that. Any dispute caused by this is unreasonable.
9. BR buyer please provide the cpf or cnpj, it will be better for
you to get it more quickly. thanks !
FAQ:
Q:Can we buy 1 piece for quality testing?
A:Yes, no problem.
Q: How long is your delivery time?
A: Generally it is 1-2 days if the goods are in stock. or it will
be 3-5 weeks if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ?
A: Yes, we could offer the sample for free charge, but do not pay
the cost of express freight.
Q: Where is your factory ? Can we visit your factory?
A:Our factory is located in Ningbo City, Zhejiang Province,China,
17kms away from Ningbo Airport. We sincerely welcome customers to
visit our company and factory.
Q: Could you add our logo on your products?
A: Yes,if your quantity more than 50pcs. we could add your logo on
the products.
