SMC KQG2H08-03S
Pneumatic Connectors SUS316 Pressure 0-1mpa
Product Description:
SMC's KQG2 stainless steel range is designed to meet the highest of
standards when it comes to critical requirements such as resistance
to corrosion, chemicals and high temperatures. Compared with the
existing KQG series, the KQG2 fittings are 30% smaller and 62%
lighter, and come in diameters from 3.2mm to 16mm.
Not only are these fittings resistant to corrosion, they are also
capable of performing in a range of pressure environments (-100kPa
to 1MPa) and temperature conditions (-5°C to +150°C). This makes
them ideal for use with compressed air, water and even steam.
What helps SMC's KQG2 series stand out against the competition is
the superior degree of corrosion resistance provided by SUS316
stainless steel. Compared to grade 304 stainless steel, this grade
provides higher pitting and corrosion resistance properties. This
makes it perfect for use in chloride-rich environments.
The combination of stainless steel performance and
ultra-lightweight, low-profile design makes SMC's KQG2 one-touch
pneumatic fittings a must-have for applications that demand
excellence in critical areas.
Features:
This product is extremely compact and light, comparing with its
predecessor KQGL06-01S. Its body is composed of stainless steel
316, and its seal parts are special FKM. It can be applied in
various material of tubes, such as FEP, PFA, Nylon, Soft Nylon,
Polyurethane, or Polyolefin. The functional temperature range is
between -5 and 150°c, and it is both grease-free and steam
-compatible.
Here are the detailed specs of the product: Dimensions: Approx. 30
% shorter; Weight: Approx. 62% lighter.
Applicable Tubing:
| Applicable Tubing | Applicable Tubing | FEP, PFA, Nylon, Soft nylon Note 1), Polyurethane, Polyolefin |
| Tubing 0.D. | Ø3.2, Ø4, Ø6, Ø8, Ø10, Ø12, Ø16 |
| Specifications | Fluid Note 3) | Air, Water, Steam Note 2) |
| Operating pressure range | -100 kPa to 1 MPa Note 4) |
| Proof pressure | 3.0 MPa |
| Ambient and fluid temperature Note 5) | - 5 to 150°C (No freezing) Note 4) |
| Lubricant | Grease-free specification |
| Seal on the threads | With sealant |
Temperature
Condition of Mounting
the Inner Sleeve | Tubing | Temperature |
| FEP tubing/TH Series | 80°C or more |
| Super PFA tubing/TL Series | 120°C or more |
| |
Note 1) For soft nylon tubing, water cannot be used.
Note 2) Consult with SMC regarding applicable tube separately.
Note 3) Avoid using in a vacuum holding application such as a leak
tester, since there is leakage.
Note 4) Check the operating pressure range and operating
temperature range of the tubing.
Note 5) It is recommended that you use the inner sleeve in the
following conditions (Except Ø3.2):
●When using at a high temperature.
●When using at a high temperature.
Male Connector: KQG2H |
Applicable
tubing O.D
(mm) | Connection
thread
R, M | Model | H
(Width
across flat) | Note 1)
ØD | L | A* | M | Note 2)
Efective
area (mm²) | Weight |
| ø3.2 | M5 x 0.8 | KQG2H23-M5 | 8 | 8 | 16.5 | 13.5 | 12 | 3 | 3.3 |
| 1/8 | KQG2H23-01S | 10 | 15.4 | 12.3 | 3.4 | 5.7 |
| 1/4 | KQG2H23-02S | 14 | 21 | 16.3 | 16.9 |
| ø4 | M5 x 0.8 | KQG2H04-M5 | 10 | 8.7 | 17.1 | 14.1 | 12.6 | 4 | 5 |
| 1/8 | KQG2H04-01S | 15.3 | 12.2 | 5.6 | 4.7 |
| 1/4 | KQG2H04-02S | 14 | 20.9 | 16.2 | 15.8 |
| ø6 | M5 x 0.8 | KQG2H06-M5 | 12 | 11.1 | 19.1 | 16.1 | 13.6 | 4 | 7.7 |
| 1/8 | KQG2H06-01S | 18.1 | 15 | 13.1 | 7 |
| 1/4 | KQG2H06-02S | 14 | 20.8 | 16.1 | 14.5 |
| 3/8 | KQG2H06-03S | 17 | 23 | 17.9 | 27.3 |
| ø8 | 1/8 | KQG2H08-01S | 14 | 13.4 | 24.5 | 21.4 | 16.1 | 26.1 | 12.8 |
| 1/4 | KQG2H08-02S | 22.3 | 17.6 | 12.9 |
| 3/8 | KQG2H08-03S | 17 | 23.7 | 18.6 | 24.7 |
| ø10 | 1/8 | KQG2H10-01S | 17 | 16.4 | 25.5 | 22.4 | 17 | 26.1 | 18.9 |
| 1/4 | KQG2H10-02S | 27.9 | 23.2 | 41.5 | 21.6 |
| 3/8 | KQG2H10-03S | 23 | 17.9 | 20.6 |
| 1/2 | KQG2H10-04S | 22 | 28.6 | 22.2 | 51.1 |
| ø12 | 1/4 | KQG2H12-02S | 19 | 18.5 | 30.5 | 25.8 | 18.6 | 58.3 | 27.4 |
| 3/8 | KQG2H12-03S | 24.7 | 19.6 | 20.5 |
| 1/2 | KQG2H12-04S | 22 | 28.7 | 22.3 | 44.6 |
| ø16 | 3/8 | KQG2H16-03S | 24.6 | 33.6 | 28.5 | 20.8 | 81 | 46 |
| 1/2 | KQG2H16-04S | 24 | 29.5 | 23.1 | 113 | 37.4 |
After-sales clause:
One year quality guarantee Policy
We will check the goods quality before shipment. If there are some
unexpected problems
happen, we hope to solve the problems with buyer through friendly
in the
following ways:
1, If it is quality problem, buyer can submit argue within 15days
after
receiving the goods,
buyer must provide photos or video and other evidence to seller for
identify.
2, Man-made damaged, buyers take full responsibility.
3, Product quality processing program:
1) The buyer return the products for bad quality reasons for one
year
(not included those
damages coursed by shipping or Man-made damaged ).
A 15% restocking fee is assessed for any products returned in
"used" condition. And then we will send a new
product to buyer and pay for the resend shipping cost.
2) If the goods (total price including shipping is less than 10USD)
has quality problems, we
will resend a new product in buyer next order; if buyer don't plan
to make a new order in
the near term, buyer can pay the resend shipping cost and ask to
resend a new product. If
there is an issue with the products, please contact us– we will
solve it as soon as we get.
If you have any other question, welcome contact us.
