SMC have recently released the VT307 series, a major upgrade to
their EVT307 valve range. These direct-acting solenoid valves are
designed to reduce energy consumption while still offering reliable
performance. Plus, electric surge suppression is available for
devices in this series. A further advantage is that these valves
come in both vacuum and energy-saving versions, providing a wide
selection of choice.
Features:
This 3 port Solenoid Valve is a direct operated poppet type with
single valve that offers various valve operations and has a low
concentration ozone resistance. Equipped with a HNBR rubber seal
material for its main valve, this item also has a mounting
dimension that is interchangeable with an existing product. In
addition, it has continuous duty type, energy-saving type and even
a vacuum specification type, thus offering diverse usage with just
one item.
Applications:
This product is applicable in a wide range of scenarios, such as
Blow-of valves, Pressure release valves, single acting cylinder
drives, Divider valves and double acting cylinder drives.
No matter if it is Blow-of valves, Pressure release valves, single
acting cylinder drives, Divider valves or double acting cylinder
drives, they can all be fitted with this product.
By choosing this product, it means that individuals can gain access
to the functionality of Blow-of valves, Pressure release valves,
single acting cylinder drives, Divider valves and double acting
cylinder drives.
Technical Parameters:
| Standard Specifications |
| Type of actuation | Direct operated type 2 position single solenoid |
| Fluid | Air |
| Operating pressure range | 0 to 1 MPa (High-pressure type), 0 to 0.7 MPa (Standard type) |
| Ambient and fluid temperature | –10 to 50°C (No freezing) |
| Response time Note 1) | 20 ms or less (at 0.5 MPa) |
| Max. operating frequency | 10 Hz |
| Lubrication | Not required (Use turbine oil Class 1 ISO VG32, if lubricated.) |
| Manual override | Non-locking push type |
| Mounting orientation | Unrestricted |
| Impact/Vibration resistance Note 2) | 150/50 m/s^{2} |
| Enclosure | Dustproof |
∗ Semi-standard
Note 1) Based on dynamic performance test, JIS B 8374-1981. (Coil
temperature: 20°C, at rated voltage,
without surge voltage suppressor)
Note 2) Impact resistance: No malfunction occurred when it is
tested with a drop tester in the axial direction
and at the right angles to the main valve and armature in both
energized and
de-energized states every once for each condition. (Values at the
initial period)
Vibration resistance: No malfunction occurred in a one-sweep test
between 45 and 1000 Hz. Test
was performed at both energized and de-energized states in the
axial direction
and at the right angles to the main valve and armature. (Values at
the initial
period) |
|
|
|
|
|
|
|
|
|
|
Support and Services:
SMC Solenoid Valves Technical Support and Service
SMC provides comprehensive technical support and service for our
Solenoid Valves products. Our team of highly trained experts are
available to assist with product selection, installation,
operation, and maintenance. We offer a wide range of services,
including:
- Product selection advice
- On-site installation and commissioning
- Troubleshooting and repair
- Preventative maintenance
- Training and education
- Technical advice and support
We strive to provide the best service and support for our
customers, so that they can get the most out of their Solenoid
Valves products. If you have any questions or would like to learn
more about our services, please contact us today.
Packing and Shipping:
Packaging and Shipping for SMC Solenoid Valves
SMC Solenoid Valves are shipped in protective packaging to keep
them safe and secure during transit. All of the packaging materials
are designed to meet the requirements of the International
Standards for Packaging and Transport of Dangerous Goods.
The valves are wrapped in a special air-tight plastic film to
prevent damage from moisture, dust, and other contaminants. They
are then placed in a durable cardboard box, and secured with
cushioning material to protect them from shock during transport.
The box is labeled with the product name, serial number, and other
important information. To ensure safe delivery, all packages are
tracked and insured.
FAQ:
- Q: What is the brand name of the product?
- A: The brand name of the product is SMC.
- Q: What is the model number of the product?
- A: The model number of the product is VT307-4G1-01.
- Q: Where is the product made?
- A: The product is made in China.
- Q: Does the product have a CE certification?
- A: Yes, the product has a CE certification.
- Q: What is the minimum order quantity?
- A: The minimum order quantity is 1.
